Air handling units BL Article BL-5
Air handling unit BL 5
BL-5: pre-selection for flow rate 5 000 m³/h. The complete set and characteristics are confirmed after checking the technical specifications.
Calculated after specifying the performance, execution and composition of the supply.
Send us the parameters or technical specifications - the engineer will specify the equipment for your facility.
- Air consumption
- 5,000 m³/h
- Dimensions
- 1050×750 mm (B×H)
- Size
- BL-5
- Nominal airflow
- 5,000 m³/h
Engineering solution
What this equipment is designed to solve
Air handling unit BL 5— position of the BL ruler for preliminary selection based on the calculated air flow. Card reference: 5,000 m³/h; cross-section or dimensions – 1050×750 mm (B×H).
The model cannot be selected only by the area of the room. Before ordering, air exchange, network resistance, outside air temperature, filtration, heating or cooling, automation and installation location are checked. The final characteristics and composition of the sections are recorded in the technical proposal and the passport of the selected design.
Application
Suitable applications
- Supply and exhaust systems for industrial and commercial facilities
- Complete with filtration, heating, cooling and automation sections according to the project
- Placement and climatic design after checking site conditions
Technical data
Characteristics
| Size | BL-5 |
|---|---|
| Nominal airflow | 5,000 m³/h |
| Cross-section B×H | 1050×750 mm |
| Free cross-section area | 0.62 m² |
| Frame height | 80 mm |
| Casing | aluminium profile frame, 50 mm sandwich panels with PU foam |
| Version | indoor or outdoor; right-hand or left-hand |
| Climatic version | V, placement category 3 per GOST 15150 (very cold climate) |
| Manufacturing | standard range |
| Unit composition | by project: filtration, heating, cooling, heat recovery, noise attenuation, automation |
| Data source | BL series catalogue (ABL), TU 4863-002-38824241-2012 |
Каталог «Центральные кондиционеры BL», ABL, 2023
For procurement and approval
Documentation
Request the available datasheet, drawing or certificates together with the quotation.
Frequently Asked Questions
No. The area does not show the required air exchange, heat dissipation and network resistance. You need the calculated flow rate, purpose of the premises, temperature, composition of sections and air duct diagram.
Convey design, specification or input data for air flow and pressure, temperature, filtration, heating or cooling, automation and layout. After verification, ABL will confirm the model, equipment, price and documentation.
Related services
Similar equipment
Air handling units of the BL series are modular supply and air handling units of our own production by ABL Engineering Group (Temirtau, Kazakhstan). The standard size range from BL 0.5 to BL 120 covers productivity from 500 to 120,000 m³/h, which allows you to select an installation for any facility – from a small office to a large industrial enterprise.
All BL air conditioners are produced in climatic version B, designed for extremely low temperatures in Kazakhstan. The modular design allows you to combine filtration, heating, cooling, humidification, recovery and noise reduction sections in any order. ABL Engineering Group offers 15 basic layout schemes, and also develops custom solutions to suit customer requirements.
Do you need to select equipment for your project?
Send the terms of reference, questionnaire or basic parameters. We will prepare a complete set and a commercial offer.
