Cartridge filters Article Cartridge filter ABL
Cartridge filter ABL
The cartridge filter is used for fine purification of dry gas from fine dust. Dust is retained on the pleated material, and…
Calculated after specifying the performance, execution and composition of the supply.
Send us the parameters or technical specifications - the engineer will specify the equipment for your facility.
- Air consumption
- 8,000–60,000 m³/h
- Pressure
- 1,800 Pa
- Air performance
- 1,000 – 60,000+ m³/h (according to the number…
- Cleaning efficiency
- Determined by calculation and selected filter material; confirmed…
Engineering solution
What this equipment is designed to solve
The cartridge filter is used for fine purification of dry gas from fine dust. Dust is retained on the pleated material, and pulse blowing throws the layer into the hopper without stopping the entire system.
Filter material, area, filtration speed and residual dust content are selected according to the type of dust, temperature, humidity, stickiness, abrasiveness and site requirements. The exact cleaning indicator is published only after selection and confirmation by a passport or protocol.
Application
Suitable applications
- Metalworking, welding, plasma and laser cutting: welding aerosol, fine dust
- Shot blasting and abrasive processing
- Pharmaceuticals, food industry, powder coating: fine dust, hygienic requirements
- Finishing stage after the cyclone: metallurgy, mining, woodworking
Preliminary parameters
Characteristics
Values are not contractual until the selected configuration is confirmed in the technical proposal and data sheet.
| Air performance | 1,000 – 60,000+ m³/h (according to the number of cartridges) |
|---|---|
| Cleaning efficiency | Determined by calculation and selected filter material; confirmed by passport or protocol |
| Residual dust | Determined by calculation and selected filter material; confirmed by passport or protocol |
| Filtration area | up to 120+ m² (according to layout) |
| Regeneration type | pulse blowing with compressed air (pulse-jet) |
| Purge pressure | 5–6 bar |
| Compressed air consumption | by number of valves (to be specified during selection) |
| Hydraulic resistance | 800 – 1800 Pa (working) |
| Operating temperature | up to 80 °C (standard) / up to 200+ °C (special material) |
| Cartridge material | polyester / antistatic / PTFE membrane / nanocoating |
| Housing material | steel/stainless / powder coated |
| Execution | Regular, street or special - after checking the site conditions; certificates only for specific execution |
A review of dust extraction systems is not a passport of this configuration; Cleaning performance and certifications are confirmed for the selected design.
For procurement and approval
Documentation
Frequently Asked Questions
The cartridge version is more compact: the pleated material provides a larger filtration area in a small housing and finer purification – up to <5 mg/m³. The hose one wins at high costs and high initial dust content (up to 50+ g/m³). If the dust content is above 50 g/m³, a cyclone is placed in front of the cartridge filter or a bag filter is selected.
No. Pulse blowing with compressed air (pulse-jet) removes the dust layer from the cartridges as the resistance increases – without stopping the system. Dust is poured into the hopper and removed through the shutter.
According to the type of dust, temperature and requirements for residual dust: polyester – standard tasks up to 80 °C, antistatic – explosive dust, PTFE membrane and nanocoating – sticky and fine dust, hard maximum permissible concentrations, special materials – temperatures up to 200+ °C.
Do you need to select equipment for your project?
Send the terms of reference, questionnaire or basic parameters. We will prepare a complete set and a commercial offer.
