Fans Reference: ABL-XFB
Smoke extraction fan ABL-XFB
Smoke extraction fan based on the centrifugal seriesABL-XFBwith a heat-resistant impeller – for removing smoke, hot gases and combustion products from premises…
Calculated after specifying the performance, execution and composition of the supply.
Send us the parameters or technical specifications - the engineer will specify the equipment for your facility.
- Air consumption
- 30,000 m³/h
- Type
- Centrifugal smoke exhaust fan, heat-resistant wheel
- Temperature
- Up to +600 °C for 120 minutes
- Series
- ABL-XFB (up to 221,730 m³/h, up to 3,202…
Engineering solution
What this equipment is designed to solve
Smoke extraction fan based on the centrifugal seriesABL-XFB with a heat-resistant impeller – for removing smoke, hot gases and combustion products from premises during a fire. Designed to operate at temperatures of the transported medium up to+600 °C for 120 minutes— the time required for the evacuation of people and the work of fire departments.
Structurally, it is a centrifugal fan on a support frame: a durable steel body, a heat-resistant wheel, and an engine removed from the hot flow. The standard size is selected according to the smoke ventilation project – according to the required flow rate and pressure of the smoke removal system of the facility.
ABL supplies the fan in a complex: selection according to the project, production of piping and transitions for the actual flange, installation under a category II construction and installation license and commissioning with measurements. The ABL-XFB series covers a range of up to 221,730 m³/h and 3,202 Pa – from local systems to large facilities.
Application
Suitable applications
- Smoke protection systems for buildings
- Trade and warehouse complexes
- Administrative buildings
- Underground parking lots and tunnels
- Industrial enterprises
- Cultural and social facilities
Preliminary parameters
Characteristics
Values are not contractual until the selected configuration is confirmed in the technical proposal and data sheet.
| Type | Centrifugal smoke exhaust fan, heat-resistant wheel |
|---|---|
| Temperature | Up to +600 °C for 120 minutes |
| Series | ABL-XFB (up to 221,730 m³/h, up to 3,202 Pa - design size) |
| Execution | Support frame, steel body, motor out of hot flow |
| Selection | According to the project for smoke ventilation of the facility |
| Complex | Piping, installation (license SMR II), commissioning with measurements |
The posted review of industrial fans does not confirm the designation of this model; operating point, engine, temperature, noise and dimensions are confirmed by the passport of the selected version.
For procurement and approval
Documentation
Frequently Asked Questions
Heat-resistant impeller and design designed to move media up to +600 °C for 120 minutes. An ordinary fan in such conditions fails within minutes – the smoke exhauster must work for the entire evacuation period.
Only for the smoke ventilation project: flow and pressure are calculated based on the geometry of the building, smoke zones and the requirements of smoke protection standards. ABL selects the standard size according to the project, and if necessary, helps with system calculations.
Yes: installation under a category II construction and installation license, piping to an actual flange of our own production and commissioning with measurements of actual parameters – one contract and one line of responsibility.
Similar equipment
Do you need to select equipment for your project?
Send the terms of reference, questionnaire or basic parameters. We will prepare a complete set and a commercial offer.
