Fans Reference: ABL-XFB
Centrifugal fan ABL-XFB
Centrifugal (radial) fanABL-XFBwith backward inclined blades – the main industrial ABL series for moving dusty and gaseous air. The backward-inclined wheel is…
Calculated after specifying the performance, execution and composition of the supply.
Send us the parameters or technical specifications - the engineer will specify the equipment for your facility.
- Air consumption
- 15,000–221,730 m³/h
- Pressure
- 3,202 Pa
- Power
- 11 kW
- Type
- Centrifugal (radial), backward-inclined blades
Engineering solution
What this equipment is designed to solve
Centrifugal (radial) fanABL-XFB with backward inclined blades – the main industrial ABL series for moving dusty and gaseous air. The backward-inclined wheel is one of the most efficient types of centrifugal: high efficiency and static pressure up to 3,202 Pa with energy efficiency of the 2nd national level.
Series range –530 – 221,730 m³/h, engine power 0.25–220 kW. Four drive designs: integral frame (A) simplifies installation, belt drive (C) with water-cooled mounting designed for high ambient temperatures. Flow passage materials are galvanized or stainless steel, special coatings for aggressive environments.
The fan is selected not “by the diameter of the air duct”, but by the operating point – the intersection of the required flow rate and network pressure loss. An error at this point costs more than the fan itself: an overloaded motor, operation outside the efficiency zone, low-frequency hum. Selection according to the operating point is carried out by ABL engineers before ordering.
Together with the fan, ABL manufactures the piping for the actual flange – flexible inserts, transitions, bends, umbrellas, silencers, support frames and vibration supports – on its own machine park in Temirtau, and installs the system under a category II construction and installation license.
Application
Suitable applications
- Dust extraction and gas purification: metallurgy, mining, cement, chemistry
- Fire smoke removal for buildings (heat-resistant wheel)
- Supercharging and technological processes
- Wiring of machines, painting and drying booths
- Ventilation of production buildings
Preliminary parameters
Characteristics
Values are not contractual until the selected configuration is confirmed in the technical proposal and data sheet.
| Type | Centrifugal (radial), backward-inclined blades |
|---|---|
| Air consumption | 530 – 221,730 m³/h (by standard size) |
| Static pressure | 99 – 3 202 Pa |
| Engine power | 0.25 – 220 kW |
| Drive circuits | A (integral frame), C (belt), D, B |
| Materials | Galvanized steel, stainless steel, special coating |
| Purpose | Ventilation, dust extraction, gas purification, smoke removal, pressurization |
| Harness | Gusset for actual flange - manufactured by ABL, Temirtau |
The posted review of industrial fans does not confirm the designation of this model; operating point, engine, temperature, noise and dimensions are confirmed by the passport of the selected version.
For procurement and approval
Documentation
Frequently Asked Questions
The fan operates at the intersection of its characteristics and the network characteristics. If you count “by diameter” or take it “with a reserve”, the motor is overloaded, efficiency drops, a low-frequency hum appears, and the hood either “doesn’t work” or drives out excess air. ABL engineers calculate the operating point from the actual network before ordering.
This is one of the most efficient types of centrifugal wheels: high efficiency, stable operation over a wide range and static pressure up to 3,202 Pa. For equipment operating around the clock, the difference in efficiency is a direct energy saving.
Yes. For high temperatures – a belt drive (diagram C) with a water-cooled support and a heat-resistant wheel; for aggressive environments – stainless steel and special coatings for the flow part. The execution is selected according to the conditions of the object.
Yes, this is the point of delivery from ABL: flexible inserts, transitions, bends, silencers, support frames and vibration mounts are manufactured to fit the actual flange at the production facility in Temirtau. Without proper piping, the fan loses up to a third of its performance due to sharp bends and poor transitions.
Similar equipment
Do you need to select equipment for your project?
Send the terms of reference, questionnaire or basic parameters. We will prepare a complete set and a commercial offer.
