Gas air heaters Article WAB50
Gas air heater ABL-WAB 50
Gas air heater for heating industrial and warehouse premises. Fast warm-up, high efficiency, automatic safety.
Calculated after specifying the performance, execution and composition of the supply.
Send us the parameters or technical specifications - the engineer will specify the equipment for your facility.
- Air consumption
- 1,450 m³/h
- Power
- 15 kW
- Heating type
- Indirect (tubular heat exchanger)
- Input power
- 15 kW
Engineering solution
What this equipment is designed to solve
Gas air heaterABL-WAB 50— installation of indirect air heating for heating workshops, warehouses, hangars and drying plants. The gas burner heats the tubular heat exchanger, and the fan blows air through it – a clean warm influx without combustion products is supplied to the room.
Direct gas heating at the point of consumption eliminates four problems of traditional schemes: expensive electric heating, a capital boiler room with a water circuit, overheating of the volume under the roof and failure of heating through constantly open gates. Installation efficiency –83 %, work without a water circuit, pumps and the risk of defrosting.
Application
Suitable applications
- Production shops and workshops
- Warehouses and logistics complexes
- Hangars and high spans
- Drying chambers and tunnels
- Auto repair, service stations, equipment garages
- Food processing (indirect heating)
Technical data
Characteristics
| Heating type | Indirect (tubular heat exchanger) |
|---|---|
| Input power | 15 kW |
| Net power | 12.4 kW |
| Efficiency | 83 % |
| Air consumption | 1,450 m³/h |
| Gas consumption (natural) | 1.45 m³/h |
| Gas consumption (liquefied) | 1.17 kg/h |
| Power supply | 220 V / 50 Hz |
| Weight | 41.5 kg |
| Air heating ΔT | 26 °C |
Source: catalog of WAB gas air heaters, LTV radiators and FM curtains. The parameters of the supplied design are confirmed by the passport and commercial offer.
For procurement and approval
Documentation
Frequently Asked Questions
No. ABL-WAB – indirect heating installation: gas is burned in a tubular heat exchanger, and combustion products are discharged outside through a chimney. Only clean heated air is supplied to the room.
No. The air is heated by gas directly at the point of consumption – without a boiler room, pumps or water circuit, and therefore without the risk of defrosting the system.
For small workshops, workshops, drying chambers and warehouses. Productivity – 1,450 m³/h, useful power – 12.4 kW. For large volumes, the line includes models up to WAB 400 (11,500 m³/h).
Similar equipment
Do you need to select equipment for your project?
Send the terms of reference, questionnaire or basic parameters. We will prepare a complete set and a commercial offer.
